BENTLY 3500/53-03-03-00監測器模塊
1.產 品 介 紹
品牌：BENTLY
型號說明：BENTLY 3500/53-03-03-00監測器模塊
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
BENTLY 3500/53-03-03-00是一款機械振動監測模塊，可用于監測旋轉機械（例如汽輪機、發電機等）的振動。以下是一些關于該產品的特點、使用方法和參數規格的介紹：
特點：
- 可以通過多個通道同時監測機械的振動，包括加速度、速度和位移等參數。
- 具有高度精確的信號采集和處理能力，可以有效地檢測機械振動的變化和異常。
- 可以使用不同的傳感器進行監測，包括接觸式和非接觸式傳感器。
- 具有多種報警和故障診斷功能，能夠及時提醒操作人員機械振動異常情況。
使用方法：
- 將BENTLY 3500/53-03-03-00模塊安裝在機械設備上，并根據需要連接傳感器。
- 使用設備連接電源并連接到控制系統或數據采集設備。
- 使用配置軟件對模塊進行配置，包括通道參數、傳感器類型和報警/故障設置。
- 監測機械設備的振動，并根據需要進行數據記錄和分析。
參數規格：
- 輸入通道：最多可支持16個通道，包括加速度、速度和位移。
- 采樣頻率：最高可達32kHz。
- 傳感器支持：支持接觸式和非接觸式傳感器，包括BENTLY的7200系列傳感器。
- 報警/故障輸出：支持?jǐn)?shù)字輸出（DO）和模擬輸出（AO）。
- 電源需求：DC 18-32V，最大功率約為15W。
- 工作溫度范圍：-20°C至+70°C。
BENTLY 3500/53-03-03-00 is a mechanical vibration monitoring module that can be used to monitor the vibration of rotating machinery (such as steam turbines, generators, etc.). The following is an introduction to the features, use methods and parameter specifications of the product:
characteristic:
The vibration of machinery can be monitored simultaneously through multiple channels, including acceleration, speed, displacement and other parameters.
With highly accurate signal acquisition and processing capabilities, it can effectively detect the changes and abnormalities of mechanical vibration.
Different sensors can be used for monitoring, including contact and non-contact sensors.
It has a variety of alarm and fault diagnosis functions, and can timely remind the operator of abnormal mechanical vibration.
usage method:
Install the BENTLY 3500/53-03-03-00 module on the mechanical equipment and connect the sensor as required.
Use the device to connect the power supply and connect to the control system or data collection device.
Use the configuration software to configure the module, including channel parameters, sensor type and alarm/fault settings.
Monitor the vibration of mechanical equipment, and record and analyze the data as required.
Parameter specification:
Input channels: up to 16 channels can be supported, including acceleration, velocity and displacement.
Sampling frequency: up to 32kHz.
Sensor support: support contact and non-contact sensors, including BENTLY's 7200 series sensors.
Alarm/fault output: support digital output (DO) and analog output (AO).
Power demand: DC 18-32V, maximum power is about 15W.
Operating temperature range: - 20 ° C to+70 ° C.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
