BENTLY 3500/53 133396-01電源模塊
1.產 品 介 紹
品牌：BENTLY
型號說明：BENTLY 3500/53 133396-01電源模塊
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
BENTLY 3500/53 133396-01是一種震動監測模塊，用于監測旋轉機械設備（如發動機、泵、壓縮機等）的振動和運行狀態。以下是該產品的特點、使用方法和參數規格：
特點：
- 可通過4-20mA、MODBUS和基于網絡的接口（如Ethernet或Modbus TCP）與現場設備進行通信；
- 采用高速數字信號處理技術，能夠?qū)崟r(shí)監測振動信號，并在出現異常情況時發出警報；
- 支持多種振動傳感器類型，包括加速度計、速度計和位移傳感器；
- 可在現場或遠程位置實時監測振動數據，并提供實時趨勢分析和故障診斷。
使用方法：
- 將BENTLY 3500/53模塊插入機架中，并將傳感器與模塊相連；
- 配置模塊，包括設置警報和閾值等參數；
- 啟動監測程序，實時監測設備振動信號；
- 在出現異常情況時，模塊將通過警報或網絡接口發送通知。
參數規格：
- 輸入電源：24V DC；
- 輸入信號：0-10V DC、4-20mA；
- 采樣率：102.4kHz；
- 通信接口：Ethernet、Modbus TCP；
- 工作溫度范圍：-20℃至60℃；
- 尺寸：160mm x 213mm x 64mm；
- 重量：約1.4kg。
BENTLY 3500/53 133396-01 is a vibration monitoring module used to monitor the vibration and operation status of rotating mechanical equipment (such as engines, pumps, compressors, etc.). The following are the features, use methods and parameter specifications of the product:
characteristic:
It can communicate with field devices through 4-20mA, MODBUS and network-based interfaces (such as Ethernet or Modbus TCP);
High-speed digital signal processing technology is adopted, which can monitor vibration signals in real time and send an alarm in case of abnormal conditions;
Support a variety of vibration sensor types, including accelerometer, accelerometer and displacement sensor;
It can monitor the vibration data in real time at the site or remote location, and provide real-time trend analysis and fault diagnosis.
usage method:
Insert the BENTLY 3500/53 module into the rack and connect the sensor with the module;
Configuration module, including setting parameters such as alarm and threshold;
Start the monitoring program to monitor the equipment vibration signal in real time;
In case of abnormal conditions, the module will send notifications through alarm or network interface.
Parameter specification:
Input power: 24V DC;
Input signal: 0-10V DC, 4-20mA;
Sampling rate: 102.4kHz;
Communication interface: Ethernet, Modbus TCP;
Operating temperature range: - 20 ℃ to 60 ℃;
Size: 160mm x 213mm x 64mm;
Weight: about 1.4kg.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
