BENTLY 3500/92-02-01-00運動控制器模塊
1.產 品 介 紹
品牌：BENTLY
型號說明：BENTLY 3500/92-02-01-00運動控制器模塊
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
BENTLY 3500/92-02-01-00是一種機械振動監測模塊，可用于監測和分析旋轉機械的振動狀況。以下是該產品的特點介紹、使用方法以及參數規格：
特點介紹：
- 支持多個振動測點的實時監測和數據采集
- 可以對多個振動參數（包括加速度、速度和位移）進行監測和分析
- 支持多種通信接口，包括Modbus、Ethernet和RS-485
- 具有高精度、高可靠性和高穩定性，可在惡劣的工業環境中長期運行
- 內置多種診斷功能，包括電纜故障檢測、傳感器故障檢測和數據質量檢測等
使用方法：
- 安裝：將3500/92-02-01-00模塊插入到BENTLY 3500系統的機架上，并連接傳感器和數據采集器。
- 配置：使用BENTLY 3500系統軟件對模塊進行配置，設置監測參數、報警閾值和通信參數等。
- 監測：啟動監測程序，實時監測振動信號和參數，并記錄數據。
- 分析：使用BENTLY 3500系統軟件對采集的數據進行分析和診斷，識別故障原因，并采取相應的措施。
參數規格：
- 供電電壓：24VDC
- 通信接口：Modbus、Ethernet、RS-485
- 振動參數：加速度、速度、位移
- 監測范圍：0-50g（加速度）、0-50mm/s（速度）、0-500um（位移）
- 采樣率：102.4kHz
- 工作溫度范圍：-40℃到+70℃
- 尺寸：106.7mm x 19.1mm x 130.2mm
- 重量：約0.3kg
BENTLY 3500/92-02-01-00 is a mechanical vibration monitoring module that can be used to monitor and analyze the vibration of rotating machinery. The following are the features, use methods and parameter specifications of the product:
Features:
Support real-time monitoring and data acquisition of multiple vibration measuring points
Multiple vibration parameters (including acceleration, velocity and displacement) can be monitored and analyzed
Support a variety of communication interfaces, including Modbus, Ethernet and RS-485
With high precision, high reliability and high stability, it can operate in harsh industrial environment for a long time
Built-in multiple diagnostic functions, including cable fault detection, sensor fault detection, data quality detection, etc
usage method:
Installation: Insert the 3500/92-02-01-00 module into the rack of the BENTLY 3500 system, and connect the sensor and data collector.
Configuration: use BENTLY 3500 system software to configure the module, set monitoring parameters, alarm threshold and communication parameters.
Monitoring: start the monitoring program, monitor the vibration signals and parameters in real time, and record the data.
Analysis: use BENTLY 3500 system software to analyze and diagnose the collected data, identify the cause of the fault, and take corresponding measures.
Parameter specification:
Power supply voltage: 24VDC
Communication interface: Modbus, Ethernet, RS-485
Vibration parameters: acceleration, velocity, displacement
Monitoring range: 0-50g (acceleration), 0-50mm/s (speed), 0-500um (displacement)
Sampling rate: 102.4kHz
Operating temperature range: - 40 ℃ to+70 ℃
Size: 106.7mm x 19.1mm x 130.2mm
Weight: about 0.3kg
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
