ALSTOM N895313512X工控控制卡件
1.產 品 資 料 介 紹：
中文資料：
ALSTOM N895313512X操作STAT LED指示以太網接口在正常操作模式下的狀態。如果STAT指示燈熄滅，則一個事件已輸入異常日志，可通過Station Manager界面查看。在正常操作期間，ALSTOM N895313512X當沒有記錄任何事件時，STAT指示燈亮起。在其他狀態下，STAT LED熄滅或閃爍，有助于定義模塊的操作狀態。ALSTOM N895313512X以太網端口指示燈（100 Mb/速度和鏈接/活動）操作兩個以太網端口中的每一個都有兩個綠色指示燈，即100和鏈接。100指示燈表示網絡數據速度（10 Mbps或100 Mbps）。如果網絡連接為100 Mbps，則此指示燈點亮。LINK指示燈指示網絡鏈路狀態和活動。當鏈路物理連接時，此指示燈亮起，當端口檢測到流量時，此LED閃爍。請注意，端口上的流量并不一定意味著以太網接口上存在流量，因為流量可能在交換機的端口之間流動。ALSTOM N895313512X
英文資料：
ALSTOM N895313512X Operation The STAT LED indicates the condition of the Ethernet interface in normal operational mode. If the STAT LED is off, an event has beenALSTOM N895313512X entered into the exception log and is available for viewing via the Station Manager interface. The STAT LED is on during normal operation when no events are logged. In the other states, the STAT LED is either off or blinking and helps define the operational state of the module. Ethernet Port LEDs (100 Mb/Speed and LINK/Activity) OperationALSTOM N895313512XEach of the two Ethernet ports has two green LED indicators, 100 and LINK. The 100 LED indicates the network data speed (10 Mbps or 100 Mbps. This LED is illuminated if the network connection is 100 Mbps. The LINK LED indicates the network link status and activity. This LED is illuminated when the link is physically connected and blinks when traffic is detected at the port. Note that traffic at the port does not necessarily mean that traffic is present at the Ethernet interface, since the traffic may be going between ports of the switch.ALSTOM N895313512X
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://qing-ting.cn
